銅鐘的保養辦法

銅鐘屬于銅制物品，在日常生活中銅鐘是很少見得，但是在一些寺廟中確實常見的擺件之一，下面大型銅鐘廠家為您介紹銅鐘的保養辦法。

Copper clocks are made of copper. Copper clocks are rare in daily life, but they are one of the common ornaments in some temples. The following large copper clock manufacturers will introduce the maintenance methods of copper clocks.

1.放置鑄銅銅鐘的房屋必須保持干燥，沒有塵埃和空氣污染物。溫度在18℃-24℃，相對濕度在40%-50%。

1. the house where the cast copper bell is placed must be kept dry and free of dust and air pollutants. The temperature is 18 ℃ -24 ℃, and the relative humidity is 40%-50%.

2.必須預防接觸鑄銅銅鐘產生的有害化學作用物質，如酸類、油脂、氯化物等。搬動銅雕一定要戴上棉絲手套，不可用手直接接觸，以避免被手上的汗腐蝕。也不可用油污的紙或盒子來包裝。

2. it is necessary to prevent contact with harmful chemical substances produced by cast copper bell, such as acids, grease, chlorides, etc. When moving the bronze carving, you must wear cotton gloves. You can't touch it directly with your hands to avoid being corroded by the sweat on your hands. Also do not use greasy paper or box to pack.

3.鑄銅銅鐘上的塵埃，要用干凈而柔軟的布片揩去，而那些需要特別小心的細節（易斷、易損），要用柔軟的毛刷刷去或用吸塵器吸走或是吹去塵埃。

3. the dust on the cast copper bell should be wiped off with a clean and soft cloth, and the details that need special care (easy to break and wear) should be brushed off with a soft brush, sucked off with a vacuum cleaner or blown off.

4.必須預防鑄銅銅鐘受到機械性損壞，相互間不應該彼此碰撞、不要疊壓碼放、對于細工精制和容易損壞的鑄銅雕塑，更加要小心維護。

4. cast copper clocks must be prevented from mechanical damage. They should not collide with each other and should not be stacked. Cast copper sculptures that are refined and easy to be damaged should be carefully maintained.

5.鑄銅銅鐘擺放時間過長之后，依據擺放的環境或多或少會出現一些暗啞的現象，這個時候可以用棉絲質的細布輕輕來回擦拭，可達到拋光的效果，從而讓表面的保護蠟層重新煥發光彩。

5. after the cast copper bell is placed for a long time, some dull phenomenon will appear more or less according to the placing environment. At this time, you can gently wipe it back and forth with a cotton fine cloth to achieve the polishing effect, so as to make the protective wax layer on the surface glow again.

鑄銅銅鐘主要表現了造型、質感、紋飾的美，多用于表現神秘有威懾力的宗教題材。鑄銅銅鐘的制作一般都要經過金屬冶煉、鍛造、雕刻、鍍金、磨光、上紅等幾個重要的工序。工序比較復雜，工藝也十分考究。

The cast copper bell mainly shows the beauty of shape, texture and decoration, and is mostly used to show mysterious and deterrent religious themes. The manufacture of cast copper bell usually goes through several important processes, such as metal smelting, forging, carving, gold plating, polishing, red painting, etc. The process is quite complicated and the process is also very exquisite.